Water Softener Service And Repair

There are many reasons why it is important to get a water softener service and repair. Not having a water softener in your home can mean the difference between having a clean, safe water that is free of germs and pollutants or polluted, hard water that is full of bacteria and disease causing organisms. It can also mean that you do not have the chemical and biological filtration that is necessary to protect the health of your family from the dangers of drinking contaminated water. If your water is hard, it will take longer to soften and it can even corrode pipes. It is recommended that you get a water softener for the safety of your entire family. There are many different types of softeners on the market today and the maintenance requirements will vary depending on the type of appliance you have. Click here to find Benjamin Franklin Plumbing services.

Residential appliances that use water softening include sinks, washing machines, dishwashers, toilets, showers and water heaters. Hard water contains high levels of calcium and magnesium which cause scale build up in your water lines and pipes. The scale is caused by minerals such as magnesium and calcium that become coated on the inside of the pipes. A water softener system works by adding a special salt known as an ionsizer to the water. The salt breaks down the calcium and magnesium to sodium ions.

When hard water has settled on the interior pipes of your home, the water becomes extremely hard. It is because of this change in the concentration of calcium and magnesium that the softening properties of the water are lowered. When hard water and its associated problems like scale build up are left untreated, they can lead to more serious problems like black pluming, rust, scale formation, soap scum, electrical scale, crystallization, backflow prevention and poor water quality. The best way to treat and prevent hard water is with a good water softener device and repair. The softening component of the device is usually the resin beads that will dissolve the excess magnesium and calcium in the water, thus reducing the hardness. Click here to look for water softener service and repair services.

Resin beads used in water softening systems come in different shapes and sizes. It depends on the type of resin used on the beads and its size to determine its potential effectiveness as a solution to the problem of hardness. Resin beads have a porous surface that allows water molecules to pass through them easily without being softened. When a bead-sized resin is mixed with water, it will form a thin film as a result of the interaction of water molecules and the resin molecules. This thin film then starts to grow bigger as it is exposed to more water until finally it gets to the final size that can be dissolved by hand or by using special equipment for the resin bead treatment.

To do the treatment, you need to have access to some tools and chemicals that are sold at hardware stores and plumbing supply shops. One of the most important things you need are the ion exchange salts. These salts are basically just salt crystals which have been ionized so that they can produce the exchange ions which are needed to soften water. What you need to do first is to make a mixture of water and the salt in order for it to be properly prepared for use as a replacement for the hardness minerals in your water softener. For this you need to add about one teaspoon of the salt to a gallon of water.

There are also some water softeners that require electricity in order to function, but they are still better than those that need water softeners using resin beads. The electricity-powered systems work by passing an electrical current through the water softener components. These ions are then exchanged with the ions produced by the salt in the resin beads.